You can reset your PC's BIOS settings to their factory defaults by selecting the Restore Defaults option within BIOS or by removing the CMOS battery from an unplugged computer for about five minutes.

No one who assembles a PC or sets up a new computer can avoid the BIOS or UEFI. That’s where you define the basics, from the ...

When a computer powers on, it configures its hardware components prior to loading the operating system. The settings it needs to configure the hardware make up the computer's Basic Input Output System ...

CMOS or Complementary Metal Oxide Semiconductor is a small amount of memory in the motherboard of your computer and is used to store BIOS settings. They are very important for your computer as they ...

When you disconnect your computer’s power supply from the wall, it jumps in to save your BIOS or UEFI settings in your motherboard’s CMOS-RAM (Complementary Metal-Oxide-Semiconductor). But even the ...

If after changing the CMOS battery your computer won’t boot, this article will help you fix the problem. CMOS battery provides continuous power to the BIOS chip. BIOS chip stores all the BIOS settings ...

Configuring the BIOS is going to be one of the final steps to setting up a new PC. The BIOS is software built on to the motherboard that manages the installed ...

The user can go to BIOS settings by pressing the access BIOS settings key when the laptop starts up. The access BIOS settings key is a single key or a combination of keys which need to be pressed to ...

Download and launch BIOS update from the motherboard manufacturer's website. Another is by reinitializing the BIOS. Certain motherboards allow you to reset the BIOS settings directly with a switch. If ...

Base clock, or BCLK as it's exposed in the BIOS, is the primary frequency where nearly every other component in your system pulls its timing from. The CPU cores, memory, PCIe and even storage derrives ...

Sounds like you were overclocking your system, and it didn't like what you were doing. Go into the BIOS screens, and set everything back to the system defaults. Make certain to save those changes ...

I've finished my build, but when I boot it up, it first says, "Detect drives done, no any drive found".<BR><BR>Why? I have the hard disk connected by SATA connector and the CD/DVD drive connected by ...